Mechanical filters

Mechanical filters are also known as pressure filters. It is an important part of the pretreatment and water purification system in the early stage of pure water preparation. It is equipped with a number of specifications of selected quartz sand and other filter materials, under a certain pressure, so that the original solution through the filter material to intercept and remove impurities, so as to achieve the purpose of filtration.

The material is made of steel lining glue or stainless steel, which is divided into natural quartz sand filter, multi-media filter, activated carbon filter, manganese sand filter, etc. according to the different filter media, and can be divided into single-flow filter and double-flow filter according to the actual situation.

Fields of application:

Mechanical filters are widely used in the water treatment process, mainly used for water treatment turbidity removal, reverse osmosis, and ion exchange softening and salt removal system of the pretreatment, but also can be used for surface water, groundwater and other aspects. It can effectively remove suspended solids, organic matter, colloids, sediment and so on in the water.

Can be widely used in electronic power, petrochemical, metallurgical plating, paper textile, pharmaceutical dialysis, food and beverage, drinking water, factory and enterprise water, swimming pools, etc., can meet the needs of liquid filtration in various industries.

Performance characteristics:

1.Low equipment cost, low operating cost, simple management;

2.The filter material can be used many times after backwashing, and the service life is long;

3.Good filtration effect, small footprint.

Technical parameters:

Design pressure: 0.6MPa (greater than this value needs to be specified)

Working temperature: 5 °C-40 °C (special temperature can be customized)

Surface treatment: brushing, mirror polishing, painting

Internal treatment: lining, lining, brush epoxy resin

Cylinder material: Q235B, SUS304, SUS316L

Single flow: 1 ~ 100m3 / h

Turbidity of inlet water: ≤ 20mg/L

Effluent turbidity: ≤3mg/L